Bibliography
[0] Küttner, K.H.: Kolbenmaschinen. B.G. Teuner Stuttgart 1993 (Neufassung in Vorbereitung)
[1] Kleinert, H.-J.; Wächter, K.: Grundlagen der Kolbenmaschinen. Abschnitt 1.1 in Taschenbuch Maschinenbau, Band 5, Berlin 1989, Verlag Technik
[2] Dittrich, E. u. a. : Technische Thermodynamik. Abschnitt 4 in Taschenbuch Maschinenbau, Band 2, Berlin 1985, Verlag Technik
[3] Kleinert, H. J.; Will, G. : Kolbenverdichter, Abschnitt 1.5 in Taschenbuch Maschinenbau, Band 5, Berlin 1989, Verlag Technik
[4] Poling, E.P.; Prausnitz, J.M.; O?Conell, J.P.: The Properties of Gases and Liquids. Mcgraw-Hill Professional, 2000, ISBN-10:00701168225
[5] DIN EN 1012-1: Kompressoren und Vakuumpumpen – Sicherheitsanforderungen, Teil1: Kompressoren. Juli 1996
[6] American Petroleum Institute: Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services. API Standard 618, a) Fourth Edition, Washington, D.C. 20 005, June 1995 b) fiveth Edition, Washington, D.C.
[7] Frenkel, M.I. : Kolbenverdichter, VEB Verlag Technik, Berlin 1969
[8] Pohlenz, W.: Bauteile für Pumpen, VEB Verlag Technik, Berlin 1983
[9] Böswirth, L.: Strömung und Ventilplattenbewegung in Kolbenverdichterventilen, Eigenverlag, Mödling 2003
[10] Blaha, J.; Smid, V.: Allgemeine Klassifikation der Anwendungsgebiete von Pumpen und Verdichtern. Maschinenmarkt, Würzburg 87 (1981), 69, S. 1419
[11] Poling, E.P.; Prausnitz, J.M.; O?Conell, J.P.: The Properties of Gases and Liquids. Mcgraw-Hill Professional, 2000, ISBN-10:00701168225
[12] Wärmeaustauscher, Vulkanverlag, 2. Ausgabe 1994
[13] Standards of the tubular exchanger manufactures association, New York 1988 (7. Auflage)
[14] Schwaigerer, S.: Festigkeitsberechnung im Dampfkessel-, Behälter- und Rohrleitungsbau. Springer-Verlag, Berlin, 4. Auflage 1990
[15] AD-Merkblätter. Hrsg.: VdTÜV e.V. Essen, Beuth-Verlag GmbH, Berlin, Wien, Zürich
[16] Machu, G.: Calculating reliable impact valve velocity by mapping instantaneous flow in a reciprocating compressor. Paper Gas Machinery Conference GMRC USA, 2004
[17] DIN ISO 6621 Kolbenringe
[18] Feistel, N. : Beitrag zum Betriebsverhalten trocken laufender Dichtsysteme zur Abdichtung der Arbeitsräume von KreuzkopfkompressorenDissertation Universität Erlangen, 2002
[19] Kriegel, G.: Beitrag zur Berechnung des Radialverschleißes von Trockenlaufkolbenringen. Dissertation Technische Universität Dresden, 1977
[20] Meltzer, G.: Einführung in die technische Diagnostik. www.mlu.mw.tu-dresden.de
[21] Samland, G.; Kolbenkompressorventile aus der Sicht eines Kompressor- und Ventilherstellers. In Industriepumpen und Kompressoren, Vulkanverlag Essen, 2002, Heft 1
[22] van Lier, L. u. a.: The Impact of an API 618 4th of 5th Edition Analysis on the Design of a Vary Large Hydrogen Compressor. Proceedings of 7th EFRC Conference 2010, S. 133 ff].
[23] Spiegel, B. u.a.: Next Generation Valve Technologie for High Speed Compressors. Proceedings of 7th EFRC Conference 2010, S. 327 ff.
[24] Aigner, R. u.a. : Development of a Stepless Flow Control System. Proceedings of 7th EFRC Conference 2010, S. 120 ff.
[25] Traversari, R. u. a.: Thermo-fluid-dynamic design of reciprocating Compressor Cylinders by Fluid Structure Interaction Software simulation. Proceedings of 7th EFRC Conference 2010, S. 286 ff.
[26] Lindner-Silvester, T. u. Hold, C.: The BCD packing ring – a new high performance design. Proceedings of 7th EFRC Conference 2010, S. 113 ff.
[27] Koop, L.G.M. u. Duinefeld, P. N.: Development of innovative sensor and method for direct measurement of rider wear. Proceedings of 7th EFRC Conference 2010, S. 105 ff.
[28] Roman, G. u. Heumesser, T.: Piston rod vibrations of excessive amplitudes on a CO2 compresser – Simulation, Measurments and Reengineering to solve the effect. Proceedings of 7th EFRC Conference 2010, S. 75 ff.
[29] Eberle, K. u. Cyca, M.: Design Challenges for Reciprocating Compressors in Specialty Gas Services. Proceedings of 7th EFRC Conference 2010, S. 259 ff.
[30] Cyklis, P. u.a.: Challenges in use of analog of the four pole transfer matrix in the 1D time domain pulsation simulations. Proceedings of 7th EFRC Conference 2010, S. 271 ff.
[31] Nored, M. u.a.: Gas Passage System Pulsation Analysis for Modern Reciprocating Compressors. Proceedings of 7th EFRC Conference 2010, S. 299 ff.
[32] Brun, K. u. Kurz, R.: Dynamic Pressure Losses in Piping Systems. Proceedings of 7th EFRC Conference 2010, S. 142 ff.
[33] Lenz, J.: Development and application of vibration improvements. Proceedings of 7th EFRC Conference 2010, S. 309 ff.