EFRC
European Forum for Reciprocating Compressors

Life Cycle Costs - Reciprocating Versus Rotating Technology in Natural Gas Compression
S. Cierniak; Wärtsilä

Gewindeabriss an der Kolbenstange eines mehrstufigen Ethylenkolbenverdichters; Ereignis, Ursache, Maßnahmen
H. Ochs; BASF

Prevention of Pulsation and Vibration Problems in Ethylene Hypercompressor Systems
E.v. Bokhorst; TNO TPD
J. Sleijpen; DSM Services

Funktionswerkstoffe - die Lösung für noch höhere Zuverlässigkeit im Ventilbau?
D. Artner; Hoerbiger Ventilwerke

A New Design of Non-Cooled Pressure Packings for Improved Life and Reliability
C. Radcliffe; Hoerbiger Rings & Packings

Festigkeitsbetrachtungen für gebaute Kolben
G. Will; TU Dresden
J. Nickol; Neuman & Esser

Hydraulic Operated Variable Clearence Pocket (HOVCP)
R.J.M. Schutte; Thomassen Compression Systems

Reciprocating Compressors with Gas Turbine Drivers in Gas Industry of the Russian Federation
A. Boiko; Gazprom
B. Smereka, A. Titov; Ariel

Mobile Hochdruck-Stickstoffgeneratoren / Verbunddesign
E. Huttar, T. Heumesser; Leobersdorfer Maschinenfabrik

Virtuelle Produktentwicklung - eine Methode zur Zuverlässigkeits- und Wirtschaftlichkeitssteigerung auch im Kolbenkompressorenbau
G. Samland et alt.; Sulzer-Burckhardt

Evolving Technology to Monitor Dynamic Bending Strain on a Crankshaft
R.E. Harris, A.J. Smalley, J.P. Harrell Jr.; Southwest Research Institute

Improving Reciprocating Compressor Efficiency with Diagnostic Software that Uses Site-specific and Real-time Data
A. Taylor; Energy Management Services

Performance Monitoring on Reciprocating Compressors, a Rational Extend on Condition Monitoring
L.G.M. Koop; Thomassen Compression Systems

Condition Monitoring für Kolbenverdichter - Stand der Technik
E. Drewes; Kötter

Evaluation of Low Frequency Pulsation Damping Devices
M.C.A.M. Peters; TNO TPD Delft

Die Grenzen der linearen Berechnung von Gaspulsationen in Kolbenverdichteranlagen
H. Stehr; TU Dresden

Optimisation of the Dynamic Behaviour of a Revamp of a Compressor Installation by Means of On-site Measurements and Simulation with PULSIM
B. Egas, A. Eijk; TNO TPD Delft

previousNext